How to Prevent Mould Growth in Your Home
If you’ve noticed mould growing in your home, then you know what a hassle it can be. Mould can cause all sorts of issues, including damaging your health. However, it is possible to stop mould from growing around your home. First, though, you must make sure your environment won’t allow it to thrive. You can also look for any plumbing issues that are creating mould and hire a qualified professional to take care of it for you.
It is essential to take action the second you notice a leak or water damage. The earlier you do something about it, the better. If the mould is left alone, it can end up getting worse. To prevent mould growth in your home, here are some of the most beneficial tips:
Monitor Under Sinks
The area directly below the sink can be a habitat for mould to grow. If you stock this section of your home with cleaning supplies and other liquids, they can leak.
To stop this from happening, remove any substances that are near the pipes so that they are not obstructed. Also, make sure all the lids are closed and check often to ensure there are no leaks or mould growing.
Check for Clogged Pipes or Leaky Faucets
If you have a clogged pipe in your home, then the water will not be able to pass through it. As a result, the water will just sit there and can potentially leak into the flooring. Mould thrives in damp environments and is caused by high humidity or indoor air moisture levels. As a result, a clogged pipe is a common way for mould to grow.
Also, mould can hide within a leaky faucet or toilet, so it is essential to check often for drips near pipes or under the sink. Be sure to look behind toilets or under the sink since they are most at risk for forming mould spores. These areas receive very little light, which increases the likelihood of mould growth.
Take notice of any walls with discolouration or that look warped. If you see any water damage, then call a professional right away, like the team at Brothers Plumbing. Water damage can be severe, and you won’t want to tackle this task on your own.
Preventing Mould in Bathrooms
Bathrooms are a common place for mould to grow since there are many moisture sources. It is essential to limit the damp environment to prevent any mildew from thriving. For instance, soggy towels or wet swimsuits can collect mould if you leave them out for too long. A better solution is to hang them to dry on your shower rod or leave them outside on a clothesline. It is also common for mould to grow within shower curtains and even wallpaper.
Be sure to ventilate your bathroom properly. That way, you can eliminate any mould spores from developing. All you need to do is run your fan or leave your windows open for at least thirty minutes after you’ve had a shower. This will increase air circulation and reduce the likelihood of mould growth.
Regular Cleanings
Cleaning your home is always a good practice to reduce mould growth. It is especially important to clean the bathroom since mould thrives in this environment. You can use a squeegee to wipe the shower wall and make sure you store shampoo, conditioner, and other liquids in a dry basket.
Be sure to use commercial cleaners that have bleach in them or other ingredients that prevent mildew. These types of products will properly sanitize surfaces, which reduces the likelihood of mould. If heavy-duty chemical products bother your allergies, you can use natural solutions like a mix of vinegar and borax.
Eliminate Moisture Sources
If you eliminate moisture sources first, then you can practice good prevention skills. You can do so by removing damp objects, opening bathroom windows, or turning on vents. Cleaning all areas of the home regularly, especially your bathroom, will be effective at preventing mould. Also, allowing light sources to shine throughout the house can reduce the amount of dampness.
Keeping Mould at Bay
If mould gets out of control, the damage can be costly to your home or cause general health issues. Many people have reported adverse reactions to mould exposure like sore throats, coughing, eye irritation, a stuffy nose, headaches, and fatigue. If you have pre-existing health conditions like asthma and COPD, having mould in your home can create even more sensitivities. It is essential, therefore, to solve any moisture and mildew issues around the house. However, if the damage is extreme, contact a qualified plumbing team, like our experts at Brothers Plumbing.
Faucet Repairs are Our Specialty
If a leaky faucet is causing your mould issues, Brothers Plumbing can take care of it for you. We can quickly identify which faucets need to be replaced or repaired, and we can correct them that day within just a couple of hours. We are fully equipped to fix any faucet and have performed services on various types, whether name brands or custom models.
When you work with Brothers Plumbing, you can be sure that we have the tools and experience necessary to work on your leaky faucet. Get in touch with us today at 800-742-0018 or info@brothersplumbing.ca to find out more information about how we can help with your faucet repair issues, or if you need any advice on dealing with mould.